Description
IN THE BOX
- UFO *1
- Type-C Charging Cable *1
- Spare Glass Tube *1
- Fast Charger *1
- User Manual *1
Power: Built-in Lithium Battery
Power Supply(included): USB-C Fast Charger
Battery Size: 1000 mAh
Clicks per Charge: ~ 50
Charging Timet: ~1.5 hours
Heater Activation: Intelligent Activation
Size: 75*47mm
Weight: 400g
Timeout: 12 seconds
Battery Capacity IndicatorStandby Mode: 1 click(Green Flash 100%-70%Blue Flash 70%-30%Red Flash 30%-0%)
Auto Power off: 5mins or 5 times heating
Warranty: 6 monthes
Instructions:
1. Turn on the UFO by pressing the power buttion 5 timesquickly. The indicator light will be solid green indicatingthat the UFO is ready for use.
2. To use the device, place the DynaVap tip (with the cap on)intoglass chamber without applying pressure. Once the Dynavap isfully inserted into glass chamber,the UFO will automaticallyactivate the heater and the indicator light will flash red 1 time(for 1 second) while heating.
3.Remove the DynaVap from the glass chamber for useonce the Cap has clicked (or to your heating preference)and the indicator light will turn back to solid green,indicating that it is ready to use again.(Note: the UFOdisengages the heater after 12 seconds of continuous useand indicator light will turn from flashing red to solidgreen when the safety feature is activated. To use again,remove the DynaVap from the glass chamber until the indicatorlight changes back to solid green).
4. To turn off the UFO,click the power button 5 timesquick ly and the indicator light will shut off.or it will turn offautomaticlly within 5mins.
Charging: To charge,connect the UFO to a USB power supplyusing the included USB-C cabie.Only use a power supply raled at 5V with 2amp orless. Chargers with multiple voltage options may notwork. For the fastest charging use a 5V,2amp USB powersupply.While charging, the indicator light will flash red.Once charging is complete, the indicator light will turnsolid red, and the UFO can be removed from thecharging cord.For maximum battery life, do not leave the UFOcharging at all times or use extensively while charging.
Tips:
The first heat cycle is typically light and full of flavour.Quick back-to-back heat cycles and short pulses ofheating will increase vapour production.For extra heating, try holding the DynaVap in for acouple of seconds after the click.Experiment and find what works best for you.
Caution:
This heater can be dangerous.Be sure to tum the heater offafter each session and always pull the DynaVap out arter the click. WeShall in no event be liable for death, injuries to persons or property, orfor incidental,contingent, speclal or consequential damages arising from the use of our products, Use only as intended.
